DaGu magic car 2wd robot chassis mobile platform
A piece of magic car multi-purpose board, to four feet for monster robot, played a major role. The magic car, wheel drive motor is TT, torque, bigger than the previous PingTaiChe, is a lot of guests want, a lot of guests reaction introductory car some small volume, not enough extension, the platform is just right for, and I add the coding speed, installed in the motor speed drive shaft,have other presets underneath the car tracing or infrared distance installed a hole, is very good car body.
 |
| 2WD Dagu Magic Car chassis |
Parameters:
Voltage: 4.5 V
TT motor(4.8 ~ 7.2 V)
Size: the first layer board: 45 mm, two board spacing: 24 mm
Tire outer diameter: 67 mm wide: 26 mm
Acrylic board: 175*109*3mm
TT motor(4.8 ~ 7.2 V)
Size: the first layer board: 45 mm, two board spacing: 24 mm
Tire outer diameter: 67 mm wide: 26 mm
Acrylic board: 175*109*3mm
 |
| 3-Wheel robot chassis |
• Includes all hardware.
• Ideal space between frames for batteries/motor controller.
• Color may vary.
The Dagu 2WD Beginner Robot Chassis V2 uses two gear motors connected to two 65mm diameter wheels and balances using a rear metal caster. The top of the robot includes many cutouts for mounting additional electronics and devices. A basic encoder disk is connected to the rear shaft. The space between the plastic frames is ideal for batteries and/or a motor controller.
• Ideal space between frames for batteries/motor controller.
• Color may vary.
The Dagu 2WD Beginner Robot Chassis V2 uses two gear motors connected to two 65mm diameter wheels and balances using a rear metal caster. The top of the robot includes many cutouts for mounting additional electronics and devices. A basic encoder disk is connected to the rear shaft. The space between the plastic frames is ideal for batteries and/or a motor controller.
没有评论:
发表评论